Achieving the First Time Printer Setup

1. Remove the printer from the package
2. When you setup the 123.hp.com/setup printer for the first time, ensure to check if you have received all the list of times when you remove the printer out of its packing
3. Raise the lid of the scanner
4. Remove the packing tape around the scanner
5. Take away the tape and packing material from the ink cartridge access area and the cleanout area
6. Remove all relevant stickers present on the 123.hp.com/oj3838 printer’s control panel too
7. Extend and push the paper tray forward until it clicks – remove the packing tape around all the material
8. Turn the printer on and plug it into a power source
9. To fully configure the 123.hp.com/setup, set Preferences, first
10. Then, on the control panel, press the down arrow and select the language and then again to Set Country/Region
11. Click on Yes
12. Pull the paper tray and tray extender outward to load the papers
13. Adjust slider width guides to align the papers
14. Push and click the paper tray forward into place
15. Lift the cartridge access door and wait for the carriage to move itself into an accessible position
16. Open the cartridge out of the package and remove the plastic tape from the top of it without touching the ink nozzles
17. Load the ink cartridges through the cartridge access door
18. Continue the (123.hp.com/setup) setup after keeping the carriage idle and silent for sometime
19. The ink carriage slot lid has to be lifted
20. Press the cartridges in till they snap into their places
21. Close the lid to secure the cartridges
22. The access door of the print cartridge can now be closed and the cartridges aligned according to the instructions on the control panel
23. The printer recognizes the alignment of the ink cartridges and prints an alignment page